REVERSE OSMOSIS
FOR THE KITCHEN
ULTRAFILTRATION

ASRO REVERSE OSMOSIS SYSTEM

Five-Stage Reverse Osmosis System:

    Stage One – 20 micron filter for primary mechanical cleaning manufactured from polypropylene fibre. Removes mechanical impurities not dissolved in the water and extends the operating life of the other filters.
    Stage Two – filter with activated carbon made of coconut shells, effective for chlorine and other organic substances removal.
   Stage Three – 5 micron filter for mechanical treatment manufactured from polypropylene fibre. This filter removes the mechanical impurities not dissolved in the water such as rust, sand, mud and etc. and also retains the activated carbon dust, which might contaminate the reverse osmosis membrane.
    Stage Four - Reverse osmosis membrane, which removes up to 96-99% of any type of impurities including bacteria and viruses.
    Stage Five – Post filter with activated carbon; it removes the lighter substances and gives the water the taste of natural spring water.
   Treated water is stored in a pressurized container wherefrom it feeds the faucet installed on the countertop of the kitchen sink. The transparent body of the first filter allows visual control of the degree of pollution of the sediment filter.
    The system is equipped with couplings, container for treated water, an individual faucet and a wrench for easy and simple filter replacement.

Technical parameters:
    Operating temperature – 2oC - 40oC;
    Filtration stages – 5;
    Couplings type JACO;
    Membrane – TFC (75GPD);
    Output for a term of 24 hours: up to 190 – 250 l;
    Minimum/maximum pressure: 2.8 – 6.0 bar;
    Stage One: 20 micron filter made of polypropylene fibre;
    Stage Two: filter with baked block of activated carbon;
    Stage Three: 5 micron filter made of polypropylene fibre;
    Stage Four: reverse osmosis membrane;
    Post filtration: high quality activated carbon GAC;
    Treated water container: 15 litres (operating volume: 10 litres);
    Dimensions [mm] 145 x 395 x 440
    Weight – 8.5 kg;


      ASRO-5M REVERSE OSMOSIS SYSTEM

     Six-Stage Reverse Osmosis System (with mineralizer):

    Stage One – 20 micron filter for primary mechanical cleaning manufactured from polypropylene fibre. Removes mechanical impurities not dissolved in the water and extends the operating life of the other cartridges.
    Stage Two – filter with activated carbon made of coconut shells, effective for chlorine and other organic substances removal.
   Stage Three – 5 micron filter for mechanical treatment manufactured from polypropylene fibre. This filter removes the mechanical impurities not dissolved in the water such as rust, sand, mud and etc. and also protects the reverse osmosis membrane.
    Stage Four - Reverse osmosis membrane, which removes up to 96-99% of any type of impurities including bacteria and viruses.
    Stage Five – Post filter with activated carbon; it removes the lighter substances and gives the water the taste of natural spring water.    
    Stage Six – AIMRO Mineralizer, which enriches the water with the minerals and microelements necessary for the human organism.
   Treated water is stored in a pressurized container wherefrom it feeds the faucet installed on the countertop of the kitchen sink.
    The system improves the taste properties of the water, eliminates the chlorine and other organic compounds.
    The cost of treated water is a few times cheaper than the cost of the bottled mineral water and its quality is guaranteed with the results from the tests carried out in US and German laboratories.
    The transparent body of the first filter allows visual control of the degree of pollution.
    The system is equipped with couplings, container for treated water, an individual faucet and a wrench for easy filter replacement.   

    Technical parameters:
        Operating temperature - 2oC - 40oC;
        Filtration stages - 5 + Mineralizer;
        Couplings type JACO or JG;
        Membrane – TFC (75GPD);
           Output for a term of 24 hours: up to 190 – 250 l;
           Minimum/maximum pressure: 2.8 – 6.0 bar;
           Stage One: 20 micron filter made of polypropylene fibre;
           Stage Two: filter with activated carbon;
           Stage Three: 5 micron filter made of polypropylene fibre;
           Stage Four: reverse osmosis membrane;
           Post filtration: high quality activated carbon GAC;
           Mineralizer: AIMRO;
           Treated water container: 15 litres (operating volume: 10 litres);
           Dimensions [mm] 145 x 395 x 440 + бак;
           Weight – 9.3 kg;

    Quantity of minerals in the treated water:

    Ca2+ - 34 mg/l
    Mg2+ - 12 mg/l
    Na+ - 22 mg/l
    K+ - 8,5 mg/l
    CO32- - 10 mg/l
    SO42- - 0,3 mg/l
    Cl- - 0,8 mg/l
    F- - 0,06 mg/l


     REVERSE OSMOSIS SYSTEM  Seven-stage system with mineralizer and infrared filter AIFIR

    With mineralizer and infrared filter AIFIR.

    This is a natural process in which non-dissolved substances are separated from the water. The main element is the reverse osmosis membrane, which separates 99% of the ions, the heavy metals, bacteria and viruses.
    The system contains:

    1. A pre-filtering group consisting of:
     - coarse mechanical filter (retaining capacity of 20 μ.)
     - activated carbon filter (eliminating the chlorine and unpleasant taste and smell of the water)
     - fine mechanical filter ( retaining capacity of 5 μ.)
    2. Reverse osmosis membrane
    3. Activated carbon post-filter
    4. Buffer container with useful volume of 10l.

    The AIMRO filter mineralizer doses precisely the minerals necessary for the human organism. The infrared bio-ceramic filter separates the toxins and fats from the organism. It also helps to regulate blood pressure to a certain extent.
    Calcium is the basic compound of bones and teeth. It has a positive effect on the metabolism necessary for the proper operation of the heart and the normal functioning of the entire organism.
    The magnesium participates in more than 300 bio-chemical processes and therefore it has a significant influence on the immune and nervous systems. It prevents sclerosis and arteriosclerosis of the blood vessels, kidney stones and cancerous diseases.
    Sodium is a mineral, which regulates the liquid exchange in the organism, maintains the oxygen level and is a perfect blood regulator.
    Using this water appears to be the best method to improve the daily diet.
    The final filtration stage – via the AIFIR filter made of bio-ceramic material, which emits infrared waves, improves blood circulation, the metabolism, decreases the cholesterol levels and extracts the toxins out of the organism.

     REVERSE OSMOSIS SYSTEM Merlin

    HIGH OUTPUT CAPACITY
    MULTIFUNCTIONAL USE
    COMPACT STRUCTURE WITH NO CONTAINER AND PUMP
   
     The FRO720 - Merlin® system is the biggest innovation for the past 30 years in the field of water treatment using the reverse osmosis method. The quantity of treated water per day allows the system to be used in households with increased needs of pure water and also in other places such as restaurants, shops, small enterprises for water bottling, fish breeding in aquariums and etc.
    The FRO720 - Merlin® system includes two highly efficient GE membranes and two activated carbon filters (pre-filter and post-filter). The operational life of the elements is as follows: 3 years for the membranes and 6 months for the activated carbon.
    The FRO720 - Merlin® system is easy to install and does not require much space to accommodate. The system allows a few output points to be fed with water (such as faucet, ice-making machine and etc.). If the filtering elements are regularly replaced it will ensure continuous and flawless operation of the system with minimum cost of funds and efforts.
    The FRO720 - Merlin® system has been attested under the ANSI-NSF 58 (NSF/ANSI 58) standard.
    The FRO720 - Merlin® system ensures non-interrupted water flow and therefore it needs no treated water container. The system uses the pressure of the treated water and thus the use of electrical pump is not required. The system set includes: faucet (FXFCH5) and a set of connecting elements (FRO720-V).
    Water treatment is made in three stages:
    Stage One – preliminary filtration with an activated carbon filter (FRO720-С), which removes some chemical compounds, elements of organic origin and etc.
   Stage Two – filtration by means of two individual reverse osmosis membranes (FRO360-М), eliminating bacteria, chlorine compounds, pesticides and other chemical substances, which influence the taste, fragrance and the colour of water.
   Stage Three – filtration with an AICRO filter containing activated carbon made of coconut shells, which improves the taste and fragrance of the water.
   The membrane retains 90-95% of bacteria and viruses.
   The pure water percentage out of the total quantity of treated water varies between 23 - 33% depending on the operating conditions. The operating life of the system may be extended by using mechanical filters for preliminary treatment such as the polypropylene filtering element FCPS5-L installed in the FHPRC-L body.

    ATTTENTION! The FRO720 - Merlin® system is designated to treat water from dinking water sources only.
    Connecting the FRO720 - Merlin® system to a hot water source is inadmissible!

 

Indicator	Minimum	Maximum
Pressure in the water supply network	2.8 atm.	5.5 atm.
Temperature of treated water	4,5oС	37oС
Output salts contents	50mg/l	2000mg/l
Total hardness of water	0 mg-eq./l	3.4 mg-eq./l
Chlorine contents	0 mg/l	1 mg/l
Iron contents	0 mg/l	0.1 mg/l
Manganese contents	0 mg/l	0.05 mg/l

*In case the output indicators of your water supply network exceed the above quoted, please connect the company, which is effecting the sale of the system.

Indicator	Minimum	Maximum	Average
Output per treated water*	1,25 l/min	2,84 l/min	1,89 l/min
Retaining capacity**	90%	99%	93%

    *The above values have been obtained under the following operating conditions:
     3,5 atm., 25oC, 750 mg/l  NaCl, 25% к-т отбора
    ** Pursuant to the WQA test results under the NSF/ANSI 58 standard
    System’s dimensions:
      Length – 51.7 cm
      Height – 43.3 cm
      Width – 24.6 cm

   FOR THE KITCHEN

    FHCTF FILTRATING SYSTEM FOR INSTALLATION ON THE KITCHEN COUNTERTOP NEXT TO THE SINK
 

    One of the most economical home water filters. It ensures excellent mechanical filtration; removes sand, mud and rust from the water.
    This filter improves significantly the taste and fragrance of the water, decreases the content of harmful substances such as chlorine, heavy metals, and organic compounds.
    It is equipped with a combined FCSTO filter, made of polypropylene and activated carbon, which purifies the water in two stages: 1) mechanical filtration; and 2) filtration with activated carbon.
    It has an aesthetic design and is simple to install and to service.

    Technical parameters:
    Operating temperature – 2oC – 52oC;
    Filtration stages – 2;
    Dimensions (height x width) – 31.6cm x 13.0cm;
    Maximum water consumption – 570 l/h;
    Maximum operating pressure – 8 atm.;
    Material of the transparent body – styrene acrylonitrile
    Material of the head - polypropylene;
    Material of the sealing under the head - Polysar EPDM;
    Material of the hose – PVC NA207-66;
    Dimensions of the cartridge – 10" x 2.5"

     FP2K FILTERING SYSTEM FOR UNDER-THE-SINK INSTALLATION
 

    A two-stage filtering system with under-the-sink installation, with two filtering elements. The filter removes the chlorine and other organic compounds from the water, improves its taste and fragrance.
    It is equipped with standard filtering elements – a mechanical and activated carbon filters. Depending on the needs the system may be equipped with filtering systems adjusted to fit the specific parameters of the water.
    Technical parameters:
    Operating temperature: 2oC - 52oC;
    Filtration stages: 2;
    Dimensions (height x width) – 35.5 cm x 27.0 cm;
    Connecting to the water mains: 1/4" fittings;
    Maximum water consumption – 1.9 l/min;
    Maximum operating pressure: 8 atm.;
    Maximum thrust pressure: 20 atm.;
    Material of the transparent body – styrene acrylonitrile
    Material of the white body: polypropylene;
    Material of the head - polypropylene;  
    Material of the hose – PVC NA207-66;
    Material of the sealing under the head - Polysar EPDM;
    Dimensions of the cartridge: 10 duim x 2.5 duim

    * FCPS5 – a sediment type filter, removing mechanical impurities with sizes exceeding 5 microns
    * FCCBL – an activated carbon filter removing the chlorine, lighter organic substances and also the unpleasant taste and smell of the water.
     Each system set is equipped with a faucet, a wrench and installation kit.

FP3K FILTERING SYSTEM FOR UNDER-THE-SINK INSTALLATION
 

    A three stage filtering system for under-the sink installation with three filtering elements: FCPS5 – a sediment type filter removing mechanical impurities with sizes exceeding 5 microns; FCCBL – an activated carbon filter removing the chlorine, the lighter organic substances and also the unpleasant taste and smell of the water;
FCCST – water softening filter.
    Each system set is equipped with a faucet, a wrench and installation kit.
    The filter removes the chlorine and other organic substances from the water, improves its taste and smell and softens the water.
    Depending on the needs the system may be equipped with filtering systems adjusted to fit the specific parameters of the water.

    Technical parameters:
    Operating temperature: 2oC - 52oC;
    Filtration stages: 3;
    Dimensions (height x width) – 35.5 cm x 27.0 cm;
    Connecting to the water mains: 1/4" fittings;
    Maximum water consumption: 1.9 l/min;
    Maximum operating pressure: 8 atm.;
    Maximum thrust pressure: 20 atm.;
    Material of the transparent body – styrene acrylonitrile
    Material of the white body: polypropylene;
    Material of the head - polypropylene;  
    Material of the hose – PVC NA207-66;
    Material of the sealing under the head - Polysar EPDM;
    Dimensions of the cartridge: 10 duim x 2.5 duim
 

ECO FP4 FILTERING SYSTEM FOR UNDER-THE-SINK INSTALLATION
 

The Eco FP4 filters are designed as result of long years of research and by applying the best technologies and materials. The filters are manufactured from materials developed with the assistance of NASA specialists. These filters use a four-stage filtration process, where the first stage is to filter mechanically the rust, sand and mud. Thanks to the activated carbon all organic impurities are removed (such as chlorine and chlorine derivatives, pesticides and other chemicals harmful for the human organism). The filter with KDF® element and micro-filtering ceramic filter are used to filter heavy metals and bacteria of colloid origin.

        Technical parameters:
        Operating temperature: 2oC - 52oC;
        Filtration stages: 4;
        Width: 37 cm;
        Height: 33 cm;
        Length: 37 cm;
        Connecting to the water mains: 1/4" fittings;
        Maximum output: 1.9 l/min;
        Maximum pressure: 6.8 atm.;
        Maximum thrust pressure: 20 atm.

    The filter set includes as follows:
    A set of two fittings, which are used to connect the filter under the kitchen sink (version 1).
    A fitting, which allows the filter to be connected directly to the cold water mains (version 2).
    Hoses leading the water to the filter and leading the treated water from the filter to the faucet.
    A faucet equipped with sealing, which is installed on the countertop and serves to stop the treated water from running.
    A wrench for easy unscrew of the head of the filter body when replacing cartridges.
    A standard set of 4 filtering cartridges (installed in the filters).

    *For the purpose of removing any heavy metals and bacteria from the water, the following filter configuration is used:
    FCPS20-CN – a filter made of polypropylene fibre, removing mechanical impurities such as sand, rust, mud and etc. where impurities’ particles exceed 20 microns.
    FCPSKDF-CN – a polypropylene filter with KDF55®, which has a bactericidal action and eliminates micro-organisms. This filter reduces the heavy metals concentration such as: iron, lead, mercury, cadmium. These types of cartridges retain hydrogen sulphide and chlorine.
    FCCBL-CN – a filter with activated carbon for absorbing chlorine and the organic compounds contained in the drinking water. This filter improves the taste and fragrance of the water.
    FCCER-CN – a ceramic filter with two stages of filtration, with a filtering range starting from 0.2 microns, this filter retains 99,8% of the bacteria contained in the drinkable water. The filter is resistant to bacteria formation and penetration of impurities inside the filter itself.


UV STERILIZER ASFUV-P5
 

The ASFUV-P5 UV lamps destroy 99.98% of all bacteria and micro-organisms. They are designed for fast and easy installation. They have a long operating life (12 months). The lamps ensure the natural protection of the water from bacteria development without using any chemicals or causing any changes in the mineral contents of the water. The lamp reflector is made of stainless steel inside and serves for increasing the UV radiation efficiency. These lamps have a variety of applications.


    Technical parameters:
        Output: 4 l/min;
        Electrical power feed: 220 - 240 Volts, 50 - 60 Hertz;
        Operating life of the UV lamp: 9000 hours (1 year);
        Power: 6 Wt;
        Number of flasks: 1;
        Dimensions: 48 x 280 mm;
        Connecting to the water mains: 1/4" fittings;
        Material of the lamp body: polycarbonate;
       Maximum pressure: 8.3 bar;
        Weight: 0.8 kg;
        Glass pipe: QTM-20245B

    Additional accessories:
 

     The set with additional accessories to the reverse osmosis systems includes as follows:
       1) a chrome plated faucet with valve for installation on the countertop of the sink;
       2) a flexible (elastic) tube for connecting to the water supply network;
       3) a wrench for cartridge replacement.

     ULTRAFILTRATION

    Water Light UF Compact
 

    Water light – UF Compact – A HOUSEHOLD ULTRAFILTRATION SYSTEM.

       1. Mechanical linear filter with filtering range of 5 microns, 10”. Using the linear filter, made of polypropylene with filtering range of 5 microns allows reducing the quantity of insoluble mechanical admixtures such as:

       - clay
       - sand
       - rust
    2. Activated Carbon Filter (CTO) -10”. Using a linear filter with activated carbon granules made of coconut shells helps to reduce the quantity of organic impurities, pesticides, herbicides, heavy metals, chlorine and chlorine derivatives. The water is improved in terms of its taste, colour and fragrance.
     3. Ultrafiltration membrane. The pore sizes of the ultrafiltration membrane is within the range from 20 to 1000 A (or 0.002-0.1 µm) and allows retaining thin-disperse and colloid admixtures, macromolecules, algae, unicellular micro-organisms, cysts, bacteria and viruses and other similar.
      4. Linear post-filter 10” activated carbon, which improves the taste properties of water.

   
 Filtering elements resource

 

Element	Size	Type	Volume	Operating life
SC-10-10	10”	Mechanical linear filter 5microns	6-9 m3	3-6 months
CTO	10”	Activated carbon filter ( CTO) -10”	6-9 m3	6-9 months
UF-14	10”	Ultrafiltration membrane	11 m3	12 months
IL-11W-C	1/4”	Post filter	6-9 m3	12 months